It is important for you to know and understand different kinds of chimneys found in the market because it helps in giving maximum mileage while using the product from time to time. It is widely recommended for people to consider buying a chimney with advanced features because it allows them to enjoy better performance without facing hassles. There are plenty of best kitchen chimney brands that can be picked in order to finalize the model. Price is one of the prime factors because it helps them to save plenty of money in an effective way. Some of the best elica chimneys in India offer the best set of appliances in the kitchen which can be picked up to use in an easy way.
Space while selecting a chimney
You should check the space between the tops and sides of the flue liner caps. If you are unable to see the space between your cap and the tops of flue liners, you can use binoculars or ask your chimney professional. A normal-sized cap should be five inches in height. Sometimes, a little less is sufficient. If the cap is only a few inches higher than the flue liner tops, you can either have them cut down but not lower than the state or local codes, or install a taller cap.
If the cap is unusually large, such as a chimney top that measures four feet in width and six feet in length, you may need to leave a little more space between the flue liners’ tops and the cap. The cap can act as a baffle and slow down the flow of flue gases.
If the cap seems too low but you aren’t sure, temporarily remove it and then try the fireplace with it off before you make any changes. A cap is important so make any necessary adjustments and reinstall it quickly.
Fireplace Mechanical Problems
Sometimes, it’s the little things that make a fireplace unusable. We will discuss common problems and how to fix them.
- Stuck or non-functional dampers
- Fireplace Door Difficulties
- Dampers that are stuck or non-functional
- Most stuck dampers are caused by corrosion and debris.
First, have your fireplace professionally cleaned. The chimney professional will clean the flue and get rid of any soot or debris that has accumulated around the damper. If your damper is beyond repair, your chimney professional can also lubricate and adjust the moving parts. For fire safety, if it’s been more than a year since the flue was cleaned, it is worth it.
Here are some tips for fixing dampers for those who can do it themselves. However, this is not a substitute for professional chimney cleaning.
Safety alert:
When working on your fireplace, wear gloves and eye protection. Damper edges can be sharp and could cause injury. The flue can contain debris that could cause injury to your eyes or ears.
How to fix throat dampers.
The damper that is a throat damper (the one located above the fireplace opening) can be operated by either a handle within the fireplace or by a small knob outside, between the mantel opening and the opening.
Use a flashlight to inspect the moving parts.
Call your chimney professional if you see any parts that look damaged, rotten or warped. Oiling is a good option if the parts are corroded or rusty. Spray penetrating oils work well. To catch any run-off from the fireplace, place some newspaper in it. Don’t put any oil on brickwork.
Let’s take a look at the handle assembly.
Some have a notched handle which pushes up the damper blade. (The damper blade, which is the plate that opens and closes, is the one.
Other types, such as the external-knob variety, have a worm gear on a shaft. The shaft turns the worm gear when you turn the knob. The worm gear is moved by a ring that pushes the damper blade’s lever. Although it sounds complicated, take a closer look and you’ll see that it’s quite simple.
